|
 |
Company: ChangTony
Title: CERAMIC pall ring
Text:
we are able to provide our customers with an extensive range of products for mass transfer operations which include gas scrubbing, stripping, de-aeration, degassing, biological filtration and mechanical filtration.
Our material for tower packing include: PP, PP+Fiber glass, PVC,CPVC,UPVC,HDPE,PVDF,Carbon steel,SS304,SS316,SS304L,SS316L and ceramic.
Mail products:
CERAMIC pall ring
Collector redistributor
CPVC pall ring
Dip Molded
Heilex ring
hy pak
Metal-Rosette-Ring
Orifice Pan distributor
PACKINT SUPPORT
Plastic structure packing
PP pall ring
PTFE bonded EPDM gasket
PTFE diaphragm
PTFE pall ring
PVC pall ring
PVDF pall ring
round valve trays
structure Mellapak
Sulzer gauze packing
Support plate
Tri Pack
Ceramic alumina ball
ceramic rashig ring
conjugale ring
If you require data sheet, please kindly send
email to us, or view our website, thank you.
Best regards,
Ningbo T.C.I CO., LTD
***
Date: 2010-05-09
|
|
|
|
Company: Shenzhen Hongye Jie Technology Co., Ltd.
Title: pad printing silicone rubber
Text:
pad printing silicone rubber
Product Description
The silicon pad is a carrier which transfers the patterns from the steel plate onto the products’ surface. It has the advantage of good printing effects, good quality, good resilience, and without any impurity.
Product Feature
Pad printing silicone rubber has good printing effect, fine quality, permanent and durable, good resilience, abrasion resistance, and without any impurities, we can provide all kinds of colors and our catalyst is free charged.
Product Specification/Models
Pad printing silicone rubber has model codes of 901, 902, 912, 916, with the hardness of 25-28 shore A respectively and model codes of 918 with the hardness of 18-20 shore A.
Application
pad printing silicone rubber is mainly used for printing irregular patterns of plastic toys,
electroplating toys, trade
makers .Silicone pad printing is a carrier which transfers printing the patterns from the steel plate onto the toys products surface.
Other Information
FAQ of pad printing silicone rubber :
1.Why the silicon pad is non-durable ?
a.This problem is caused not by the liquid silicon rubber itself, but in the process of filtering, the filtering handled not properly and impurities are not all filtered out; or in the process of packing as containers not cleaned thoroughly.
b.As the silicon oil will break the molecular chain of the silicon rubber. More silicon oil added, softer the pad printing will be, meanwhile nondurable and easy ageing it will also turn to be.
c.Some customers do not know well about the performance of silicon rubber. Actually, the durability of printing pad is closely related to the size of printing pattern. Some factories do not want to take the trouble to change the printing pad. While in fact, for large pattern, large silicone pads should be used, otherwise, use small one.(Generally, the ratio of the silicone pad to printing pattern is 3:1)
2.Why the printed pattern is incomplete or not clear?
If the silicon pad is too hard while the pattern is very delicate or small, the printing patterns will be incomplete or not very clear, for in that way the silicon pad could not adsorb the printing ink from the steel plate well. If your pattern is very delicate or small, please use soft silicon pad for pad printing.
② If the percentage of water in the ink is very high, the printing pattern also will be incomplete, and spot may appeared. For this situation, please clean your ink box, or change the printing ink or Tianna water.
3. Why the silicon pad did not absorb the ink?
Any silicon pad or liquid silicon rubber could absorb ink well. If large patterns or big letters need to print, the printing pad will for sure absorb ink well. For small letters, please do not use hard silicon pad, as it could not absorb the printing ink thoroughly from the steel plate.
4. Why the silicon pad can not
transfer the printing pattern well?
It is normal phenomena that every two out of ten products have this problem if the plastic toys are not spray painted. As in the production process, mold release agent will be sprayed onto the surface of the steel plate for eevery dozen products, and there will be some mold release agent left on the surface of the first one or two product. Please use Tianna water or face-clean water to clean the products before used for pad printing.
5. Why we should add silicon oil into pad printing silicon?
Customers should change the hardness of the silicon pad according to the different patterns. Silicon oil can change the hardness and the viscosity of the liquid silicone rubber.
Date: 2010-05-07
|
|
|
|
Company: Shenzhen Hongye Jie Technology Co., Ltd.
Title: Manual mold silicone rubber
Text:
Manual mold silicone rubber
Product Description
Manual mold silicone is a flowable liquid, and the quality has nothing to do with the color. It consists of two components. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-3 hours.
Product Feature
manual mold silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, high temperature resistance and time of reproduction determined on the basis of customers.
Product Specification/Models
Specification of manual mold silicone:
HY-528# is applicable to make molds of smaller products and the reduplication will be 2-3 times.
HY-540# , compared to other two types, for its moderate hardness and better quality & performance, its reduplication will be 20-30 times.
HY-570# is applicable to large size products duplications and Electronic equipment antivibration.
Application
Manual mold silicone rubber is mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment antivibration, and so on.
Other Information
FAQs of the manual mold silicone
1.How to deal with the bubbles during the mixing process?
It depends on your practical situation. Firstly you can deal the mixture with a vacuum machine if you have one; If no such machine, you can reduce the mixing ratio of the hardener from 4% to 1%-2%.Then in the prior period of the reaction of the mixture will be slower, then the air in the mixture will exhaust by itself for a longer curing time to release the bubble.
2. The solutions of the sticky of the silicone mold?
a.The main reason for this problem is that you do not handle the products or original molds well, then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or a unsmoothed surface, you should polish and clean the products after which it will be molded ,then spray the release agent. Normally, the release agent can be Vaseline , detergent. liquid wax Etc. In practical process, you can brush different release agent according to different material.
b. The second reason is that the operator pour the silicone into the mold when the mixture is mixed evenly, then the finish silicone mold will partialy cured.
3. What should you do for deformation of the silicone mold ?
It should deal apart according to the size of the products, In principle, the hardness of the silicone should be consistent to the size of the products. For the small size products with detailed patterns, the soft silicone can be applicable which the shore A should be 15-20 for easy demoulding and not damage of the patterns. Other wise harder silicone should be needed for large size products, such as products with size 50cm will need harder silicone with 40-50 shore A , then no-deformation. If Large products but features detailed patterns then 30 shore A silicone will be workable.(The process should be a layer silicone add a layer fiber glass or cloth..).The outer of mold can be plaster, glass fiber reinforced plastic(unsaturated resin and fiber glass) to protect the products from deformation
Date: 2010-05-07
|
|
|
|
Company: Shenzhen Hongye Jie Technology Co., Ltd.
Title: mold making silicone rubber
Text:
mold making silicone rubber
Product Description
Mold making silicone rubber is white or red flowing liquid with general hardness of 22-50A after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with easy operation, non-deformation, high-temperature resistance, acid-alkali resistance and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
Product Feature
1. Good characteristics of easy-operation
2. Light viscosity and good fluidity
3. Low shrinkage
4. Favorable tension
5. No deformation
6. Favorable hardness
7. High temperature resistance, acid and alkali-resistance and ageing resistanc
Product Specification/Models
According to the different materials, two series of mould making silicon rubber are divided, which are HY-6 and HY-7.
a. HY-6 Series includes model codes of HY-620, HY-640, HY-628, HY-638 with the hardness of 18-22 shore A, 38-42 shore A, 25-30 shore A and 35-40 shore A respectively.
HY-620 and HY-640 are particularly suitable for pouring mould.
HY-620 is for small crafts mould making, while HY-640 is for large crafts mould making. Common features of HY-620 and HY-640: light viscosity, pourable effort, good fluidity, easy-operation, good tension and high tear strength.
HY-628 and HY-638 are particularly suitable for brushing mould making.
Common features of HY-628 and HY-638: moderate viscosity, easy-operation. Agents are available if requested. It won’t affect the quality of silicon rubber but to make the operation much easier.
b. HY-7 Series includes model codes of HY-718, HY-728, HY-738 with the hardness of
15-20 shore A, 25-30 shore A and 35-38 shore A respectively.
HY-718 is a kind of soft silicon rubber and suitable for pouring mould making of small crafts.
HY7-28 with moderate viscosity is suitable for pouring mould and collapsible mould making of crafts in medium size.
HY-738 with high hardness is suitable for to collapsible mould making of crafts in large size.
Application
mold making silicone rubber is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decorationmold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.。
Other Information
FAQ of moulding silicone rubber:
1. Why could the silicone mold be reused only for a few times?
It can be due to the following reasons:
a. Adding too much silicone oil in to silicon rubber. Silicon oil is an additive which destroies the molecular weight of silicone rubber and reduce the tension and tear strength.
b. Using the silicon rubber with a high hardness to make molds for small sized products with delicate and intricate designs and the silicon rubber with a low hardness to makes molds for large sized products with simple designs.
2. Why does the silicone mold get burnt out?
This consequence happens only because you have left out the important notes when using unsaturated resin materials to produce your products. The unsaturated resin produces great heat when added the curing agent. So you must demould the product within 3 minutes to avoid this problem.
3. Why does the silicone mould appear to be dry outside but wet inside?
Because molding silicone rubber is a kind of condensation silicone rubber, which get solidified after absorbing moisture from the air. In order to provide a significant shelf-life for the silicon rubber, we will dry out the water in the silicon rubber.
Solution: Add 0.05% water into the silicon rubber and Stir over a low speed briefly when you use it.
4. Why is the tear strength of the silicone mold weak?
In order to reduce the viscosity of silicone rubber and pursue a good quality, you may add a lot of silicone oil into the silicon rubber when making molds. In fact, it might have just the opposite effect. The tension and the tear strength will be reduced badly with the addition of silicon oil. And the silicon molds will be in a weak and flimsy manner.
5. Why is the silicon mold oily?
The molding silicone rubber itself doesn’t contain any oil, so it won’t be oily. If the mold is oily, it may be because you add the compound silicone oil( the compound of silicon oil and white oil). The white oil is not silicon oil but a kind of pe6. Why isn’t the silicon mold acid - alkali and aging resistant?
It is due to the addition of the silicon oil. Normally we do not advise our customers to add any silicon oil into the silicon rubber. If it is necessary, the ratio must be 5%-10%.
7.Why is the appearance of the finished mold striate and unsmooth?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided
Date: 2010-05-07
|
|
|
|
Company: SVMEXPORTS
Title: jatropha seed germination
Text:
SVM EXPORTS grow and supply premium quality Jatropha seeds for agricultural use. We also supply treated Jatropha seeds and saplings. Our seeds can withstand any soil and climatic conditions as they are gathered from the foothills and forests of Western Ghats. Jatropha plant needs very less maintenance.
We offer jatropha seeds that are derived from Jatropha Curcus, an oil yielding plant. A native plant of South America, Jatropha is a crucial bio diesel feedstock. Its leaves and seeds are extensively used in numerous medical preparations, since ages. The oil is extracted by crushing the seeds. Being unfit for human consumption, since ancient times its oil is used in oil lamp. Lately constant efforts and research are conducted to utilize Jatropha as a workable source of vegetable oil to generate fuel.
Germination: 80%
Oil Content: 32-35%
Moisture content: 7-8%
Date: 2010-03-15
|
|
|
|
Company: Viesuli
Title: SIA VIESULI LATVIA
Text:
Hello
We are Latvian(Lettland) FIRM WHO IS PRODUCING fresh frozen bull, heifer, cow lamb meat even boneles in pieces or carcasses
We have HALAL sertifikat too
if you are interested please call us !
Our Tel number +37126810688
Ervins
Date: 2010-01-06
|
|
|
|
Company: retre
Title: 5533
Text:
ytfytyftyfytfytftyfytfytftyftyftftyftyftyfytguyhguk
Date: 2009-12-10
|
|
|
|
Company: brandjerseysale Trading Co.,Ltd
Title: nhl authentic hockey jerseys #19 RED YZERMAN RED WINGS CCM NEW!
Text:
We supply all the NFL and nhl NBA and MLB jersey with original quality and the prices of them are best vip prices, NFL jersey price is including shipping fee and NBA jersey price including shipping.
website is:*** And the following is the available list for the NFL and NBA jersey models. If you are of any intestested of them, please reply me to the e-mail of: *** My msn is : ***
Yahoo ID: ***
Date: 2009-11-30
|
|
|
|
Company: retre
Title: pig
Text:
pig is very good
Date: 2009-11-18
|
|
|
|
Company: ZACZYK
Title: chilled and frozen beef meat
Text:
Dear Sirs,
ZACZYK company has been successfully acting on the Polish and European market since 1991 at beginning as Trade and Purchasing Centre of Cattle For Slaughter and Meat later as beef meat processing plant, having supplied to its Customers the highest quality beef meat products and service. Our experienced and well trained stuff assures quality of production at the highest world level what reflects in obtained quality certificates EFSIS, SGS, HACCP with A grade.
Nowadays, ZACZYK‘s products are already indentified in European market as luxurious beef meat, where in our Clients’ opinion, ZACZYK’s meat provides special taste strictly selected Polish origin beef. All chefs who at least once made a course from ZACZYK‘s beef reconfirmed that their clients distinguished its unique savor.
ZACZYK‘s exclusive beef meat is available for every who wants to mark him out among other mediocre companies.
I can offer for business oriented company as follows:
• ZaC’Burger – 100% pure beef;
• Beef meat elements (chilled and frozen) – striploin, tenderloin, entrecote, topside, silverside, knuckle, rump, brisket, neck, chuck tender, high shoulder, shin, shank, blade, tails, tongues, offal;
• Beef stripes;
• Beef cubes;
• IQF minced meat;
I strongly believe that our cooperation is going to bring us mutually fruitful benefits.
Please inform me what are your needs, expectations and offers in beef meat.
I look forward to hear from you soon.
Regards,
Robert Leśniak
Zakład Przetwórstwa Mięsnego ZACZYK
PL33-336 Łabowa 176
Tel./Fax: 0048 18 475 14 70
Mobile: 0048 604 104 468
Date: 2009-09-16
|
|
|
|
|
|
All messages: 25
|
Page - 1/3
|
|
|
|
|
